Loading Dock Operations SWMS
Loading dock coordination — dock leveller operation, wheel-chock and trailer-creep prevention, truck-driver exclusion, forklift/pedestrian segregation, dock-plate integrity and adverse-weather loading.
SWMS variants reference your state’s WHS legislation. Instant download after payment.
Loading dock operations sit at the intersection of powered mobile plant, road transport interfaces and pedestrian movement, making them one of the highest-incident zones in any warehouse, distribution centre or retail back-of-house environment. The work involves coordinating arriving and departing trailers, deploying dock levellers or dock plates, segregating forklifts from drivers and pedestrians, and managing the dock-edge fall risk whenever a trailer is absent or partially withdrawn. Under Model WHS Regulation 2025 Chapter 4 Part 4.5, dock levellers and forklifts are powered plant requiring documented risk control, while Part 3.2 imposes an explicit duty to manage workplace traffic. Because the activity routinely involves Schedule 1 high-risk construction-equivalent work (powered mobile plant and a fall risk from the dock edge exceeding two metres into a trailer well), a Safe Work Method Statement is mandatory before any loading or unloading commences and must be reviewed at each shift pre-start.
Hazards identified
7 hazards covered, sorted by priority.
Forklift and operator fall into dock well causing crush injuries, fatal entrapment and prosecution for inadequate vehicle restraint
Forklift tips into gap between trailer and dock causing operator ejection, fractures and potential fatality
Pedestrian struck by forklift mast or load resulting in fatal crush, lower-limb amputation or head trauma
Worker falls 1.2–1.5 metres to driveway causing spinal injury, fractures and lost-time injury exceeding statutory threshold
Plate dislodges under forklift load causing tip-over, product damage and serious operator crush injury
Forklift loses traction or pedestrian slips at edge causing falls, sprains and lost-time musculoskeletal injury
Workers suffer CO poisoning, headache, unconsciousness and notifiable incident under WHS Regulation s38
Control measures
Hierarchy-of-controls order: elimination → substitution → isolation → engineering → administrative → PPE.
- 1Elimination — Where feasible, schedule deliveries to side-loading bays or ground-level roller doors removing the dock-edge fall and trailer-gap hazard entirely from the task.
- 2Elimination — Prohibit forklift entry into trailers during electrical storms, high winds above 60 km/h or when dock leveller fault indicators are illuminated.
- 3Substitution — Replace manual dock plates with hydraulic dock levellers rated to AS 4997 with integrated lip control reducing manual handling and alignment error.
- 4Substitution — Use electric pallet jacks instead of LPG forklifts at enclosed docks to eliminate carbon monoxide exposure under AS 2671 ventilation thresholds.
- 5Engineering — Install automatic vehicle restraint (Rite-Hite or equivalent) interlocked with dock leveller and internal traffic light per AS 1742.3 traffic control principles.
- 6Engineering — Fit dock-edge fall protection (self-closing gates or rapid-deploy barriers) compliant with AS/NZS 1657 whenever no trailer is presented.
- 7Administrative — Implement a documented exchange-of-keys or trailer-key control system holding driver keys at the gatehouse until loading complete per Part 3.2 traffic management plan.
- 8Administrative — Enforce driver exclusion zone in marked safe-waiting area with high-visibility line marking and pre-start brief sign-on against this SWMS each shift.
- 9PPE — High-visibility vest to AS/NZS 4602.1 Class D/N, steel-cap boots to AS/NZS 2210.3 and bump cap for all personnel within the dock operational zone.
- 10PPE — Hearing protection to AS/NZS 1270 (SLC80 ≥22) for operators exposed to reversing alarms and roller-door cycles exceeding 85 dB(A) time-weighted average.
Applicable Codes of Practice
Imposes specific duty to manage forklift and dock leveller risks including operator competency, exclusion zones and pedestrian separation at the dock interface.
Requires documented traffic management plan covering vehicle movements, trailer arrival, driver exclusion and pedestrian routes through the dock precinct.
Establishes the hierarchy of control methodology and consultation duty applied when selecting dock-edge, restraint and segregation controls under reg 36.
Defines forklift operating procedures at dock interface, leveller load ratings and trailer-restraint verification before mast entry per recognised industry standard.
High-Risk Construction Work triggered
Forklifts, electric pallet jacks and hydraulic dock levellers are powered mobile plant operating in proximity to pedestrians and drivers at every dock cycle.
Dock-edge falls combined with internal trailer-floor height differentials, mezzanine access and elevated cage work routinely exceed the two-metre threshold.
PCBU must prepare, consult workers on and retain this SWMS for the duration of the work plus two years after a notifiable incident; penalties for non-compliance are substantial and indexed annually under the prevailing WHS schedule.
Who this is for
- →Warehouse and distribution centre operations managers
- →Logistics supervisors in retail back-of-house docks
- →Cold-chain and 3PL forklift fleet coordinators
- →Site WHS officers at freight consolidation terminals
What you receive
- ✓Editable DOCX template — Microsoft Word compatible
- ✓State-specific WHS legislation schedule (NSW/VIC/QLD/SA/WA/TAS/NT/ACT)
- ✓Hazard register with risk ratings + hierarchy-of-control mapping
- ✓Worker sign-on register, pre-start checklist, and incident escalation flow
Worked example
At a regional distribution centre handling palletised dry goods, the shift supervisor convenes the 06:00 pre-start brief at Dock Bay 4 where three B-double trailers are scheduled. Forklift operators, two driver-loaders and the visiting transport driver gather around the printed SWMS clipped to the dock-side board. The supervisor walks through the hazard register, pausing on trailer-creep and dock-edge fall, and confirms the wheel-chock and red-amber-green light interlock is functional. The visiting driver surrenders trailer keys under the exchange-of-keys system and is directed to the marked driver-safe zone behind the yellow line. Each operator signs the SWMS register acknowledging the controls, including the requirement to verify dock leveller capacity (6 tonne) against the loaded forklift plus pallet weight. Mid-shift, rainfall begins and surface water tracks into Bay 4. A forklift operator stops work, refers back to the SWMS adverse-weather control, and requests the supervisor deploy anti-slip matting and reduce travel speed to 5 km/h. The supervisor annotates the SWMS dynamic-risk section, briefs the change to the crew, and operations resume. At shift-end the signed SWMS is filed in the dock office register, satisfying the WHS Regulation 2025 record-retention duty and providing evidence of consultation should a notifiable incident occur.
Related legislation
- WHS Act 2011 (model)
- WHS Regulation 2025
- Managing the Risk of Falls at Workplaces CoP